感应式动力及数据传输-轨道
该类型使用悬空的初级轨道电缆安装方式。在初级线圈轨道上，使用“E”型的集电器从多方面覆盖两根初级电缆磁场来感应产生电流。
对沿轨道行走的车辆应用时,通常要求整个行进轨道路线具备连续性的感应电流。感应式动力及数据传输初级线圈轨道电缆沿用电设备行进路线全程铺。集电器安装在被驱动车辆上面。
如果系统中存在几个可移动的轨道段的话，例如道岔等状况；我们也可通过系统分线接线盒，将两段轨道电缆连接起来，即为这些移动轨道段提供动力，又不互相干扰。
Track Supplies for Rail System
更多信息
Track Supplies do convert mains voltages of usually 50 or 60 Hz into a higher frequent output voltage.
Usually Inductive Power Transfer systems run at 20kHz. Only with this higher frequency of the output voltage and so the alternating magnetic field around the track cable an efficient non-contact power transfer becomes possible. Depending on the Regulators used on the secondary side, track currents of 80 or 125 A are used.
产品数据表
Typical* Track Supplies:
| Description** | Nom. Power** |
|---|---|
| 6 kW Track Supply Module 80 A | 6 kW |
| 6 kW Track Supply Module 125 A | 6 kW |
| 16 kW Track Supply Module 80 A | 16 kW |
| 16 kW Track Supply Module 125 A | 16 kW |
| 35 kW Track Supply Cabinet 80 A | 35 kW |
| 35 kW Track Supply Cabinet 125 A | 35 kW |
* for other sizes, output voltages and design please do contact Conductix-Wampfler
** for detailed product data please take the corresponding product documentation
下载
E-Pickups and Regulators
更多信息
E-pickups are used where an elevated installation of the primary cable is no problem, i.e. at Electric Monorail Systems (EMS) or in skillet lines.
Pickup and Regulator are two separate units, to assure that small built-in envelopes, as typically given in electric monorail systems, are not a problem.
产品数据表
Typical* Sizes of E-Pickups and corresponding Regulators:
| Descrion IPT®** | Nom. Power** | Output Voltage** |
|---|---|---|
| 750 W E-Pickup / Regulator Modul | 750 W | 560 V DC |
| 750 W E-Pickup / Regulator | 750 W | 560 V DC / 24 V DC 4 A |
| 4 kW E-Pickup / Regulator | 4,4 kW | 560 V DC / 24 V DC 4 A |
* for other sizes, output voltages and design please do contact Conductix-Wampfler
** for detailed product data please take the corresponding product documentation
